2. System and Network Setup
75
A
irLive WN-250R User’s Manual
2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:
In this mode, you can connect your wireless router with another, to combine two access
points and expand the scope of wireless network, and all clients (wired only – AP will not
accept wireless clients in this mode) of two wireless routers will think they’re on the same
physical network. This function is very convenient when you need to connect two networks
between two buildings. Here are instructions about how to connect two wireless routers
together:
Here are descriptions of every setup items:
Band (2):
Select the band you want to use, two wireless routers must use the
same setting.
Channel
Select the channel you want to use, two wireless routers must use
Number (3):
the same setting.
MAC address 1(4):
Input the MAC address of another wireless router.
Security
Click to setting security for this connection (Please go to
Settings (5):
section ‘2-7-3 Wireless Security’ for detailed instructions).
NOTE: Two wireless routers must use the same mode, band, channel
number, and security setting!
1
2
3
4
5
