Air Live WN250R Скачать руководство пользователя страница 4

Страница: 4 / 160

AirLive WN-250R User’s Manual

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the authority to operate equipment.

Federal Communication Commission (FCC)

Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency

exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches)

during normal operation.

The antenna(s) used for this transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter.

The equipment version marketed in US is restricted to usage of the channels 1-11 only.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE

EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and

telecommunication terminal Equipment and the mutual recognition of their conformity

(R&TTE).

The R&TTE Directive repeals and replaces in the directive 98/13/EEC

(Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of

April 8, 2000.

Содержание WN250R

































































































































































Результаты поиска

Содержание WN250R

Отзывы:

Похожие инструкции для WN250R

Бренды по названию

Популярные бренды

Air Live WN250R, Руководство пользователя

Результаты поиска

Содержание WN250R

Отзывы:

Похожие инструкции для WN250R

Бренды по названию

Популярные бренды