3. Making Configuration
AirLive WN-220R User’s Manual
58
Clients 1 and 2 are allowed to associate to the wireless LAN, but a wireless client with a
MAC address not specified in the Control table is denied to associate to the wireless
LAN. Client 3 is a wired client and so is not affected by Association control.
3.3.3.5 Miscellaneous Items
z
Remote Administrator Host/Port
In general, only Intranet user can browse the built-in web pages to perform administration
task. This feature enables you to perform administration task from remote host. If this
feature is enabled, only the specified IP address can perform remote administration. If the
specified IP address is 0.0.0.0, any host can connect to this product to perform
administration task. You can use subnet mask bits "/nn" notation to specified a group of
trusted IP addresses. For example: "10.1.2.0/24".
NOTE:
When Remote Administration is enabled, the web server port will be shifted to 88.
You can change web server port to other port, too.
z
Administrator Time-out
The time of no activity to logout automatically. Set it to zero to disable this feature.
z
Discard PING from WAN side
When this feature is enabled, any host on the WAN cannot ping this product.
z
SPI Mode
When this feature is enabled, the router will record the packet information pass through
the router like IP address, port address, ACK, SEQ number and so on. And the router will
check every incoming packet to detect if this packet is valid.
