Air Live WN-220R Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 81

background image

Copyright and Disclaimer

AirLive WN-220R User’s Manual

FCC Statement

Federal Communication Commission Interference Statement This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:

z

Reorient or relocate the receiving antenna.

z

Increase the separation between the equipment and receiver.

z

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

z

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. For product available in the USA/Canada market, only channel 1~11 can be
operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.

IMPORTANT NOTE

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.

«
1
2
3
4
5
...
»

Содержание WN-220R


















































































Отзывы:

Нет отзывов

Похожие инструкции для WN-220R

DES-3526 - Switch - Stackable

Бренд: D-Link Страницы: 258

Бренд: Datasheen Страницы: 25

TotalStorage SAN16M-R SAN

Бренд: IBM Страницы: 116

Бренд: Tripp Lite Страницы: 20

Бренд: Konica Minolta Страницы: 38

Бренд: Western Digital Страницы: 8

Бренд: Supermicro Страницы: 24

Бренд: IEI Technology Страницы: 86

Lite N42B1P Series

Бренд: Dahua Technology Страницы: 14

Net2Air Ins-40085-US

Бренд: Paxton Страницы: 4

Бренд: ZyXEL Communications Страницы: 215

Бренд: IDT Страницы: 207

Бренд: Idis Страницы: 17

IGS-5225-20T4C2X

Бренд: Planet Страницы: 16

Elinx EIR508 Series

Бренд: B&B Electronics Страницы: 2

Бренд: Symantec Страницы: 100

Бренд: Aaeon Страницы: 57

Бренд: Juniper Страницы: 196

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды