MN-745
4
1. Install the swivel elbow air fitting (F) onto the air springs (C) finger tight plus one and a
half turns. Do not over tighten.
2. Set the upper bracket (A) over the fitting and the air spring post and cap with a nylon
jam nut (E).
The flat part of the nut will be facing the bracket.
3. Tighten the nut by holding the nut with a wrench (or medium size crescent wrench) and
spinning the air spring by hand (nut only needs to be torqued to 4ft/lbs) (fig. 2).
4. Install the lower bracket (B) onto the air spring with the ½-13 flat head screw (D) using
the middle hole (fig. 3). Leave loose at this time.
Assembling the Air Spring Assembly
NOTE
fig. 2
Upper Bracket (A)
Fitting (F)
Air Spring (C)
Jam Nut (E)
fig. 3
Flat head
Screw (D)
Air
Spring (C)
Lower Bracket (B)
NOTE: use the center hole
for mounting to the spring
RideControl
