Air Lift Air Lift 1000 60818, Руководство по установке

Страница: 5 / 18

3
MN-753
Air Lift 1000
Item Part # Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Qty
A 46174 Air spring .................................................... 2
B 09960 Protector .................................................... 2
C 20937 Air line assembly ........................................ 1
D 10466 Zip tie ......................................................... 6
E 21230 Valve cap ................................................... 2
F 21233 5/16 ” Hex nut ............................................. 4
G 21234 Rubber washer ........................................... 2
H 18411 Star washer ................................................ 2
I 18501 M8 Flat washer .......................................... 2
J 21236 Tee ............................................................. 1
K 21455 Valve .......................................................... 2
L 10638 Uni clamp................................................... 6
HARDWARE LIST TOOLS LIST
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Qty
Hoist or floor jack ............................................................ 1
Safety stands .................................................................. 2
Safety glasses ................................................................ 1
Air compressor or compressed air source ...................... 1
Spray bottle with dish soap/water solution ..................... 1
Installing the Air Lift 1000 System
Missing or damaged parts? Call Air Lift customer
service at (800) 248-0892 for a replacement part.
STOP!
Fig. 1
GETTING STARTED
1. Jack up the rear of the vehicle or raise on a hoist. Support the frame with safety stands
(Fig. 1).
2. Lower the axle or raise the body of the vehicle until the springs are completely extended
(wheels hanging).
OBSERVE TENSION ON BRAKE LINE. DO NOT STRAIN.
3. Remove the plastic cap from the barbed stem on the end of the air spring. Exhaust the
air from the air spring by rolling it up toward the barbed stem. Replace the cap on the
stem to hold the flat shape (Fig. 2). Fold air spring into a “hot dog bun” shape.
Fig. 2
Air spring
CAUTION