Air Lift 78604, Руководство по установке

Страница: 12 / 20

10
MN-895
Air Lift Performance
ADJUSTING EXTENDED OR DROP HEIGHT
USING LOWER MOUNT
Your struts have been pre-set at the factory to provide maximum drop height while maintaining
adequate tire clearance to the air spring. If you wish to gain more extended height (lift),
which is the same as reducing drop height, or want to lower the chassis further and there is
still adjustment available at the lower mount, please use the following procedure:
1 . Support the vehicle with jack stands or a hoist at approved lifting points .
2 . Remove the wheel .
3 . Using the supplied spanner wrench, loosen the lower locking collar (Fig . 26) .
4. Deflate the air spring to 0 PSI on the corner you are adjusting.
5 . Disconnect lower mount from suspension .
6 . Spin the lower mount to the desired location .
Not all models will have further drop height available.
7. Re-install lower mount to suspension and torque fasteners.
8. Tighten the lower locking collar to the lower mount using significant force.
fig. 26
NOTE