GDMMTA582-1G
Version 0010
30
For ease of operation the control panel is designed in 2 parts.
To access the fuses, the battery and all of the electrical
connections, as well as the hand accelerator cable, unscrew the
11 sheet screws Ø4.2x19 on the left-hand side of the control
panel. (Figure 6-18)
Remove the control panel and place it on protective foam
previously rested against the front strut of the trike. The
electric cables are long enough to perform this operation.
(Figure 6-19)
Figure 6-18
Figure 6-19
Disconnect battery cables before any intervention in the electrical circuit!
Fuel system
Refer to the Illustrated Parts Catalogue.
The Tanarg fuel system consists of one fuel tank centrally located underneath the
passenger seat of the aircraft. There is one fuel supply line equipped with a filter and a
shut-off valve that runs from the fuel tank and through to the mechanical fuel pump of
the engine. All of the components for the engine are standard as per the Rotax manuals,
which should be consulted for maintenance information.
The Tanarg 582 Fuel system is simple and easy to inspect visually.
Features:
Capacity 65 Liters.
Fuel drain tap.
Breather system.
Sight gauge for remaining fuel.
Electric Flow Meter for electronic fuel usage information.
(Usage information provided by the digital flight display, if equipped)
Safety fuel tap.
Fuel filter.
The Rotax engine contains the fuel pump. Consult the Rotax manual for instructions.
The flow meter and the fuel filter are directional, they must be installed so that the
fuel flows in the correct direction.
