3
●
ON/OFF button
ON/OFF
Remote control
Note: Heat mode is available on
all heat pump models.
Signal transmitter
▲
▲
▲
▲
▲
AUTO
COOL
DRY
FAN
HEAT
Fan 2
Fan 1
Fan 3
Fan 4
●
Press this button, Auto, Cool,Dry, Fan,
Heat mode can be selected circularly.
MODE button
MODE
Auto mode is default while power on.
Under Automode,the temperature will not
be displayed; Under Heatmode, the
●
Press this button, Sleep On and Sleep
Off is defaulted. After the unit is turned off,
the Sleep function is canceled. After Sleep
Under Fan and Auto modes, this function is
not available.
Off can be selected. After powered on,Sleep
SLEEP button
SLEEP
●
By pressing this key,you may select AUTO,
FAN 1, FAN 2, FAN 3 or FAN 4, and may also
cycle between them. FAN 4 only in cool mode.
After being energized, AUTO is defaulted. Only
FAN button
FAN
initial value is 28
C
(
o
o
F); Under other
82
modes,the initial value is 25
C
(
o
o
F).
77
Press this button, the unit will be turned on,
press it once more, the unit will be turned
off. When turning on or turning off the unit,
the Timer, Sleep function will be canceled,
but the presetting time is still remained.
(Note:When select Fan 4, the fan speed is
same as fan3 on this unit)
●
SWING button
SWING
Press this key to activate or deactivate
the swing.
AUTO
COOL
DRY
FAN
HEAT
Notice: This is a general use remote controller, it could be used for the air conditioners with multifunction;
For some function,
OPERATION OF WIRELESS REMOTE CONTROL
(Only for cooling and heating unit
.
As for cooling only unit, it won’t have
any
action when it receives the signal
of heating operation.)
which the model doesn't have, if press the
corresponding button on the remote controller
Names and functions of wireless remote control
Note:
Be sure that there are obstructions between receiver and remote controller; Don't drop or throw
the remote control; Don't let any liquid in the remote control and put the remote control directly under the
sunlight or any place where i
t i
s very hot.
AUTO
that the unit will keep the original running status.
function set up, the signal of Sleep will display.
In this mode,the time of timer can be adjusted.
this key can not adjust the fan
sreed, but can send
LOW fan can be set
under DRY mode, pressing
message.
SWING Mode available on this model.
