Air 802 AP-G300, Руководство пользователя

Страница: 95 / 98

The band should be set as shown for both (B+G) in order to receive all
possible networks in your area. The Mode will need to be set to “Client”. The
Network Type will be Infrastructure. You will need to set the SSID. This is the
name of the transmitting access point that you are attempting to gain access.
You may not know the SSID. In this case, on the left-hand side of the screen,
click on “Wireless”, followed by a click on, “Site Survey”. After you have the
Wireless Site Survey page, click on “Refresh”. A list of the available
networks will appear. Click on “Select” to the right of the SSID you choose to
be a client. You may elect to click back on the right-hand side, the “Basic
Settings” tab and double check that your SSID is now shown.
Note: If you move from one location to another, as in a yacht moving from
one marina to another, then you will need to reset the SSID to the network of
your new location.
The only other screen that you might need to consider for basic
94