Air 802 AP-G300, Руководство пользователя

Страница: 11 / 98

Caution: DON’T plug the power cord into PoE device before you finish install
ake sure the maximum length of the RJ-45 cable is shorter than 100M (328
vice, you should use
ted to the “P+DATA OUT” port.
aution
the antenna and Ground wire to ensure the safety.
M
feet) for normal operation under IEEE 802.3 standards.
When you plug the regular RJ-45 cable into the PoE de
the regular RJ-45 cable to plug into the “DATA IN” of “Power Over Ethernet Kit”
to connect to hub/switch or use the crosslink RJ-45 cable (Not included in the
Packing List) to connect with user’s PC.
The RJ-45 network cable must be connec
C : Be careful! Don’t plug the two cables inversely. It will damage the
LED Panel
devices! And you have to use our PoE (included in the packing list) to
guarantee that power supply is normal.
LED State Description
Of No Power f
Power
dy On System rea
Off No Power
On Wireless system ready WLAN
hing h WLAN Flas Transmitting data throug
Off No Power or connection
On
Has physical connection to a Fast Ethernet
(100 Mbps) network
LAN
Flashing
ing data thru Ethernet Transmitting or receiv
wire
All On
t button triggered to Reboot this Rese
device
All Flashing utton triggered over 5 seconds to
quickly
Reset b
Reset to the default setting
RSSI
20%~100%
hing ning Wireless All Flas
(slower) In AP Client mode and scan
signal
RSSI 20% s signal strength is 0% Off Wireles
10