Air 802 AP-G300, Руководство пользователя

Страница: 66 / 98

Enable the QoS and then fill in Bandwidth Ratio (H/M/L) the device has three
Bandwidth Priorities High, Medium and Low user can allocation Bandwidth to
these and default is High:50
％
, Medium:30
％
and Low:20
％
.
The following table describes the priorities that you can apply to bandwidth.
Priority Level Description
High Typically used for voice or video applications that is
especially sensitive to the variations in delay.
Medium Typically used for important traffic that can tolerate
some delay.
Low Typically used for non-critical traffic such as a large
number of transfers but that should not affect other
application.
Click the
QoS
link under
Management
to open the QoS Setting page. This
page is divided into three parts: basic settings, QoS rule settings, and current
QoS setting table.
1. Enable QoS and enter Max Throughput (default 20Mbps)
、
Bandwidth Ratio (default H:50%, M:30%, L:20%)
The following table describes the labels in this part.
Label Description
QoS Enabled Select this check box to enable quality of service.
Bandwidth Borrowed Select this check box to allow a rule to borrow
unused bandwidth. Bandwidth borrowing is decided
65