AIPTEK PocketCam 4000, Руководство пользователя, Страница: 48 / 52

Troubleshooting
46
I did not delete the picture
and movie, but cannot find
the data in the CF card.
Cannot power on my
camera even though
batteries are installed.
Cannot set the strobe to the
"On" mode.
Cannot take pictures and
movies when pressing the
Shutter button .
When using the camera
The camera has no power. The batteries may be out of power, please
change the batteries.
Make sure that the batteries are
installed correctly.
If it is idle over 3 minutes, the camera
will shut down automatically, please
rotate the
Mode dial to OFF , then
rotate it to to switch on.
The storage is full. Please free some
space of the CF card or flash memory.
Check if the camera is under the status
of charging batteries.
Check if the CF card is set to
"protected".
If the " MEMORY ERROR " message
shows on the LCD display, please set
the
Mode dial to mode format the
card.
Check if your files are stored in the
camera's built-in memory. If there is a
icon at the right bottom section on the
LCD display, it means you are using the
camera with a CF card. Please remove
the card to find the data in the flash
memory. (For details, see the "Removing
the card" section on page 6)
Charging the flash strobe requires more
power of batteries. When the battery is
under the status of low power, the strobe
On cannot be set. Please change the
batteries.
Question Answer