*VIDEO DOOR STATIONS:
Any Aiphone MK or MY Series video door
station can be used:
-MK-DAC: Surface mount, black
-MK-DBC: Semi-flush mount, black
-MK-DGC: Semi-flush mount, metal cover
-MY-DGV: Semi-flush mount, vandal
proof, stainless steel cover
-MY-DS: Surface mount, fixed camera,
Brown
CAUTION
* Do not connect any AC wires to any terminal on any unit, as damage may occur. Connect only specified power source to + and - terminals.
* Do not install more or different power sources than specified for the system.
* Do not attempt to install or connect wires on the MY system while the system's power supply is plugged in.
* MY monitors and related equipment, unless specified as "weather resistant", are designed for indoor use only.
Video door stations (MK-DAC, MK-DBC, MK-DGC, MY-DS, MY-DGV) may be installed outdoors in a protected area. Do not expose
any equipment directly to rain or extreme weather conditions.
IMPORTANT
* Any other manufacturer's products installed with the system (power supply, external device, etc.) are not covered under Aiphone's warranty.
* Do not mount Aiphone equipment in the following places, as it may cause the system to malfunction:
- High or extreme cold temperature areas: under direct sunlight, near equipment that varies in temperature, in front of air
conditioner, inside a refrigerated area, etc.
- Places subject to moisture or humidity extremes.
- Places subject to environmental conditions, such as dust, oil, chemicals, salt, etc.
* All intercom and video units are electronic devices, which must not be subjected to water or any other liquid.
* Severe weather conditions, such as lightning storms, may cause damage to Aiphone equipment. We recommend that power surge
protection be installed to minimize potential component level damage.
- Install the SA-1 surge arrestor to protect the power supply from a surge.
- Additional SA-1 surge arrestors should be installed on all communication lines (one SA-1 for every two connected to master.).
SPECIFICATIONS:
Power Source:
18V DC. Use PS-18C for initial three video units, including adaptor and monitors.
Use PS-18YC/A for every additional two monitors.
Current consumption:
250 mA (standby)
Scanning lines:
525 lines
Wiring distance:MK Camera to MY-CU or MYW adaptor: Max. 330' with 18 AWG wire
MY-CU or MYW adaptor to MYW-BA-M: Max. 500' with Aiphone cables 841806 & 851602*
Max. distance from first to last MY monitor is 1000' with Aiphone cables 841806 & 851602*
* Total distance from first monitor/adaptor to farthest sub monitor cannot exceed 1000 feet.
Dimensions:
7-1/2"H x 3"W x 1-5/8"D
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
Toll Free Technical Support:
1-800-692-0200
FAX: 1-800-832-3765
E-mail: [email protected]
Pg. 2
MYW-BA-M Instr.
0700bkjd
NOTE:
An audio intercom system is required for
proper system operation. Select the
appropriate system based on overall
distance and communication requirements.
2. MYW-P3L with MYH-CUB and LEF-C Audio:
MK-DAC*
A1
A2
B1
B2
Brn
Org
+
-
1A1
1A2
2A1
2A2
B1
B2
U1
U2
+
-
MYW-P3L
A1
A2
PS-18C
+
-
MYW-BA-M
A1
A2
B1
B2
U1
U2
+
-
MYH-CUB
Wire #851602
Wire #851602
MK-DAC*
A1
A2
Wire #841806
(+/- wires doubled)
Wire #841806
(- wire doubled)
Max. 500'
Total 1000'
(Audio system not shown)
PS-18YC/A
+
-
Do not c
