manualshive.com logo in svg

Aiphone AN-8000EX, Руководство по эксплуатации

Поделиться
Скачать
Aiphone AN-8000EX Скачать руководство пользователя страница 53

2-5

Chapter 2:  FUNCTIONS AND OPERATION

2. CONVERSATION FUNCTIONS AND OPERATION

2.1. Conversation

2.1.1. Hands-free conversation

Permits conversations to be
made without holding the
handset when another party is
called or when a call is received
in automatic connection mode. 

or

Duplex conversations

R e - m e a s u r i n g

2.1.2. Handset conversation

Calls can be made or received by lifting the handset.

Ambient Noise Level Measurement (not applicable to IP stations)

The master station has a function to measure ambient noise level at its
installation site, automatically making the internal setting for proper
hands-free conversation. (IP stations do not have this function.)
When acoustic feedback such as squeal or howl* inhibits hands-free
conversation, recalibrate by re-measuring ambient noise as follows. 

* Caused by a portion of the sound output from the speaker returning

to a microphone of the same amplifier.

With the handset in place, press the [

] key and then the 

[

] key to begin ambient noise level re-measurement. 

"Re-measuring" will appear on the LCD (if the AN-8000MS station is
being used).
After about five seconds, a confirmation tone sounds to indicate that
ambient noise re-measurement has been completed.

Duplex conversations

or

One-way conversation

One-way conversation

PTT

2.1.3. PTT conversation

This function makes announcements and
conversations possible to areas with a high
ambient noise level. Pressing the Push-to-talk
key during a conversation enables one-way
conversation from the party who pressed the
Push-to-talk key. Conversation flow is reversed
when the key is released. When both parties
have pressed the Push-to-talk key, the party
who pressed the button last is given
precedence to speak.

Tip

The master station automatically measures the ambient noise level when the Exchange is powered up or
the station is connected to the line. During the measurement, the station's status indicator flashes and the
dial operation cannot be performed.

Содержание AN-8000EX





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды