manualshive.com logo in svg

Aiphone AN-8000EX, Руководство по эксплуатации

Поделиться
Скачать
Aiphone AN-8000EX Скачать руководство пользователя страница 134

5-2

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

1. AN-8000 SOFTWARE GENERAL DESCRIPTION 

1.1. General Description

The supplied AN-8000 software program is for performing system settings and features following two
functions.

1.1.1. Equipment scan and network setting functions

Detect the Exchange, Multi interface unit, and IP station connected to the local network, and then perform
equipment network settings. Use this software when performing initial setting.

Note

The equipment scan function can only be used within the effective broadcast range. Other equipment that is
not within this range must be set using a different network setting (Refer to 

p. 4-12

).

1.1.2. System setting function

Performs individual settings related to system. 

Note

This software does not display system operation logs, but these can be viewed using browser software
instead. (Refer to 

p. 6-17

.)

1.2. PC Network Settings 

Perform PC network settings in advance according to your network administrator's instructions. Be sure to
verify these, since incorrect settings could adversely affect other equipment connected to the same network.

1.3. Notes on Setting Update

To avoid equipment failures, never restart the Exchange, Multi interface unit, and IP station or switch off the
power while in the process of updating* settings. 

* The Status indicator light will remain lit while updating is in progress.

Содержание AN-8000EX





















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды