Aiphone AN-8000EX Скачать руководство пользователя страница 218

Страница: 218 / 244

7-2

Chapter 7: MULTIFUNCTIONAL STATION MENU SCREEN OPERATION (AN-8000MS/8500MS ONLY)

Programs the contents into the Auto Dial key.

Monitors the Line connection status of the Exchange.

Updates the operation log files of the Exchange or
AN-8500MS.

2. Line monitor (refer to

p. 7-3

)

3. Updating log file (refer to

p. 7-3

)

0. Maintenance (refer to

p. 7-4

)

Sound volume set for the AN-8500MS can be confirmed.
(AN-8500MS only)

4. Volume (refer to

p. 7-4

)

4. System reset (refer to

p.7-8

)

Restarts the system.
When network settings have been changed, it is necessary
to restart the Exchange or AN-8500MS.

1. Network settings (refer to

p.7-5

)

Changes the IP address, subnet mask, or default gateway
of the Exchange or AN-8500MS.

2. The line attribute setting (refer to

p.7-6

)

Sets the station number of the station to be connected to
the Exchange and IP station.

3. Clock settings (refer to

p.7-7

)

Sets the system clock.

1. Auto-dialing programming (refer to

p. 2-9

)

1. KEYS USED FOR MENU SCREEN OPERATION

The following keys are used to operate the menu screen of the AN-8000MS Multifunctional Master Station and
the AN-8500MS IP Multifunctional Master Station.

2. MENU ITEMS

Liquid crystal display: Displays the menu screen.

Selection key: Used for item selection and input

value set.

Menu key: Used for changing either setting or

normal modes.

Arrow keys: Used for moving the arrow (cursor).

Clear key: Used to delete a last single character

shown on the display.

Dial keys: Used to enter figures.

AN-8000MS

This figure represents the AN-8000MS.

Содержание AN-8000EX





















































































































































































































































Результаты поиска

Содержание AN-8000EX

Отзывы:

Бренды по названию

Популярные бренды

Aiphone AN-8000EX, Руководство по эксплуатации

Результаты поиска

Содержание AN-8000EX

Отзывы:

Бренды по названию

Популярные бренды