8
This product has been carefully
inspected prior to leaving the facto-
ry. It should provide you with years
of satisfying service under normal
operating conditions. Do not, how-
ever, force the tool to perform out-
side its design parameters. Such
usage will void the warranty.
1.
Slide battery into the bottom of
the housing handle until a click
sound occurs. Do not force bat-
tery: It should slide easily into
place with nominal force. Any
difficulty doing so indicates in-
correct alignment.
2.
Tool speed is preset to the maxi-
mum range of the tool. With an
SPC
-
2PGM
External Program-
ming Module (optional accesso-
ry), tool speeds may be reset to
a lower speed within the range
of the tool.
3.
Select a proper size socket/drive
bit and insert into the quick
change holder or install onto the
square drive of the tool.
4.
Depress the trigger to engage
the LED light and start the tool.
5.
When the pre
-
set torque is
reached, the tool’s precision clutch
will shut off the tool automatically.
6.
Prior to using on an application,
it is advised to verify the output
torque of the tool as set. Check
the torque on an
Auditor™ Dig-
ital Tester
(or comparable sys-
tem).
Operations
WARNING!
Read the instruc-
tion manual before operating
the tool. Always wear safety
glasses or face shields when
operating this product. Failure
to do so can result in injury.
Check for damage to the tool, parts,
or accessories that may have oc-
curred during transport. Take the
time to thoroughly read and under-
stand this manual prior to operation.
This tool kit contains:
1
-
1
-
18V Li
-
Ion Battery Pack
1
-
Torque Adjustment Tool
1
-
Angle Head Adjustment Tool
4
-
Color Rings for tool Identification
1
-
Instruction Manual
Attaching or Removing Battery
Pack
1.
To connect battery, line up the
tracks and attach the battery
pack. Slide toward the battery
pack until it locks into position
with a click.
2.
To remove the battery pack,
press the red button on the top of
the battery pack and release the
battery pack.
Assembly
1. PRESS
2. RELEASE
SLIDE
