7
●
Do not charge inside a box or
container of any kind. The battery
must be placed in a well
-
ventilated area during charging.
●
Do not dispose of battery packs
into household waste, fire or wa-
ter. Battery packs should be col-
lected, recycled or disposed of
in an environmentally
-
friendly
manner. Call authorized warranty
centers for locations to dispose of
damaged or inoperable batteries.
The Signature Series Precision
Clutch industrial shut off wrench is
designed for nut tightening/loosening
and screw driving/loosening. It is not
appropriate to use for wood/mild
steel drilling. Please refer to the Fig-
ure 1 on this page to familiarize
yourself with the major components
of this tool before use.
1.
Power Switch
Depressing the power switch will
energize the LED light
(2)
in front
and the tool starts to rotate. When
released, power to the motor ceas-
es and the tool stops working im-
mediately. The LED light will re-
main on for 5 seconds, then shut
off.
2.
LED Light
3.
Forward/Reverse Button
The tool is always in forward op-
eration unless the Forward/
Reverse button is pressed. When
the button is pressed, the blue
LED shows and the tool will be in
reverse operation. To switch tool
back to forward operation, simply
press the button again. The blue
LED disappears and the tool is
back in forward operation.
4.
Anvil (Drive Shaft)
The anvil will accept any 1/4” hex
bit or 1/2”square drive hex socket
depending on specific model. Be
sure the bit/socket is fully en-
Functional Description
gaged before operating the tool.
Otherwise, the bit/socket may
detach and cause property dam-
age or personal injury. Use only
impact
-
type sockets or industrial
grade bits.
5.
Angle Head Orientation
Adjust the angle head kit to the
degree you wish. (in 45°
incre-
ments for a total of eight posi-
tions for head orientation).
6.
Torque Adjustment Cover
Open the torque adjustment cap.
Use the supplied torque adjust-
ment tool to either tighten or loos-
en the spring until the desired
torque is reached.
7.
Li
-
Ion Battery
This battery provides electrical
power to the motor. Please
charge it according to the charg-
ing instructions listed in this man-
ual.
WARNING:
Use the tool to either
tighten or loosen nuts and screws
ONLY in stipulated torque and volt-
age ranges.
5
6
2
4
3
1
7
Figure 1
