20
21
MX STRADA SERIES
CHAPTER 5
To set all the channels.
RPM channel is by default enabled: since the direct RPM connection is used when the vehicle
does not have an ECU. The software automatically disables it when an ECU protocol is selected.
See Chapter 9 for further information about the hardware RPM signal connection.
To set a channel just click on its line and the related panel shows up.
5.2.1 Channels configuration
The first two channels in the list are RPM and speed, follows the configurable channels that
can be managed as analog or as digital according to what they are connected to.
Typically analog sensors are pressure sensors, thermocouples, potentiometers, etc… while di-
gital inputs are used for managing pushbuttons, that may be used for activating the digital
ouputs.
Selecting
“Analogic”
options to be set are
n
Channel name
n
Function: this parameter is useful in the data analysis process
n
Sensor type
n
Measure unit
n
Sampling frequency
n
Display precision: it configures how many decimal digits will be shown on the display
n
Specific parameters
In the following image you see two different channels configuration windows.
MXG 1.2 MXP MXS 1.2 STRADA 2019.qxp_Layout 1 15/03/19 11:57 Pagina 21
