RACE STUDIO 3 SOFTWARE
24
25
EVO4S
CHAPTER 10
10.1.4 Math Channels
10.1.5 Parameters
1) Lap Detection
2) Start Data Recording
Press "Math channels" tab. Using the button
"Add Channel"
you can calculate the engaged
gear both with a learning lap (calculated gear) and filling in the RPM values (precalculated
gear). You can as well configure Bias channels and add linear corrector channels.
To modify/delete a math channel click the corrisponding icon and select the desired option.
Press
"Parameters"
tab. Here you can set the lap detection (GPS or Optical beacon) as well as
decide when start recording.
You can choose whether detecting a lap
signal from GPS or using optical
transmitter/receiver.
GPS Beacon requires the track width while
Optical beacon requires you to insert a time
during which the system does not record
additional lap signals.
By default EVO4S starts recording when
RPM value is greater than 500 or GPS
speed is greater than 10 km/h.
Using Custom condition option you can
define one or more custom conditions
and decide that your EVO4S start recording
when one or all set conditions occurs.
EVO4S
EVO4S
EVO4S.qxp_Layout 1 09/01/17 10:22 Pagina 25
