AIM Joraco TOCCLE-AIRE HP-16 Скачать руководство пользователя | Manualshive

Страница: 26 / 26

background image

HYDRO-AIRE SERIES PRESSES

INSTALLATION, OPERATION, AND MAINTENANCE

23

Factory Support

Our 40 year reputation for providing quality

TOGGLE-AIRE, DIRECT-AIRE & HYDRO-AIRE

presses  that  meet  a  wide  range  of  special  requirements  and  our  60  years  of  service  and
support experience are all available to you with one phone call. It's your biggest advantage
in dealing directly with our factory. Make use of it. Please call with any and all questions
you may have regarding your applications and our equipment.

Please  contact  our  engineering  department  to  discuss  any  questions  you  may  have  about
control systems, modifications, and your applications. We are glad to supply our presses built
to your specifications should you require other than our standard systems.

WARRANTY

A  I  M (hereafter  referred to  as  the manufacturer)  warrants that all  TOGGLE-AIRE  &  Direct-Aire  products will  be  free  from  defects in
material and workmanship for a period of 180 days from the date of shipment to the original purchaser.  Any claim made against this
LIMINTED WARRANTY must be made by contacting the customer service department of the manufacturer. At its option, A I M will repair
or replace any product it deems defective under the terms of this warranty. If factory service is required, transportation costs to and from
the factory are to be paid by the purchaser.  This warranty does not apply to equipment that has been subject to abuse, misapplication,
negligence, improper maintenance, alteration, or failure to follow manufacturer's instructions.

A I M’s, SOLE OBLIGATION UNDER THIS WARRANTY IS STATED ABOVE. THIS WARRANTY IS IN LIEU OF ALL OTHERS, EXPRESSED OR IMPLIED,

AND UNDER NO CIRCUMSTANCES WILL A I M BE LIABLE FOR ANY CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF TOGGLE-AIRE
PRODUCTS.

THINK SAFETY . . . WORK SAFELY . . .

TM

TM

«
...
24
25
26

Содержание TOCCLE-AIRE HP-16



























Отзывы:

Нет отзывов

Похожие инструкции для TOCCLE-AIRE HP-16

Бренд: Earlex Страницы: 20

Бренд: Caen Страницы: 17

Бренд: jbc Страницы: 4

Бренд: Mafell Страницы: 12

Бренд: Mafell Страницы: 142

Бренд: Parkside Страницы: 78

Бренд: Parkside Страницы: 156

Бренд: Parkside Страницы: 90

Бренд: Parkside Страницы: 39

Бренд: Parkside Страницы: 57

Бренд: Parkside Страницы: 51

Бренд: Image Industries Страницы: 32

Бренд: InWin Страницы: 15

Бренд: TDK-Lambda Страницы: 27

Бренд: Lambda Electronics Страницы: 21

XPower Powerpack 200 Plus

Бренд: Xantrex Страницы: 58

Soresen XTR 100-8.5

Бренд: Ametek Страницы: 280

Бренд: Intepro systems Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды