6
5.6.6
HS9384-5H Housings
These housings require connection to 230 VAC and are
designed to be used where site power is 230 volts.
The HS9384-5H housings can easily be used with either 230
volt or 24 volt cameras.
The internal transformer provides 24 VAC for both the
heater and 24 volt camera power.
Do not remove the transformer insulator. No
user serviceable parts are underneath.
115 VAC
Input
White
Red
24 VAC
White/
Black
Striped
To Heater/Defogger
Red
White/
Black
Striped
6
5
2
1
12
11
8
7
To Camera
Wago
Wago
Black
Brown
Black
To Camera
To Heater/Defogger
To Heater/Defogger
No Connection
To Camera
Blue
Blue
230 VAC
Input
24 VAC
White/
Black
Striped
White/
Black
Striped
6
5
1
2
12
11
8
7
Supply
Supply
(Tape)
Wago
Wago
Brown
Red
T
o
Cam
e
r
a
B
lu
e
Red
24 VA
C
2
30
VA
C
I
n
p
u
t
Whi
t
e
/
B
l
a
ck
S
t
r
i
p
ed
Whi
t
e
/
B
l
a
ck
S
t
r
i
p
ed
6
5
1
2
1
2
11
8
7
T
o
H
e
a
t
e
r
/
D
e
f
o
gg
e
r
T
o
H
e
a
t
e
r
/
D
e
f
o
gg
e
r
For 24 volt cameras:
1. Installing a 24 volt camera into the HS9384-6H housing
utilizes the internal transformer for camera power.
2. Connect the supply (115 VAC) to the primary flying
leads of the transformer (white wire/pin 1, black wire/pin
6). Use the wago connectors provided for this
connection.
3. Connect the secondary flying leads (white/black striped
wires/pins 7 and 12) to the camera's 24 volt input. See
wiring diagram
Figure 8
for clarification and
Figure 5
for power connection drawings.
Figure 8 HS9384-6H Transformer
Wired for 24 Volt Camera
5.6.5
HS9384-2H Housings
These housings are to be connected to 24 VAC only and are
designed to be used where site power is 24 volts.
The HS9384-2H housings are designed to be used with 24 volt
cameras only.
1. Connect the supply (24 VAC) to the unoccupied sides of
the gray Wago connectors.
2. Connect the flying leads (white and black) to the
camera's 24 volt input.
For 230 volt cameras:
1. Installing a 230 volt camera into the HS9384-5H housing
requires inserting both the field supply wire (115 VAC)
and a section of hook-up wire (not included, minimum
20 AWG wire) into the unused side of the Wago
connectors (provided), then connecting the other end of
the hook-up wire to the camera’s 230 VAC input.
Repeat for pins 1 and 6. (see
Figure 9
).
2. The secondary flying leads (white/black striped) will not
be used in this application and should be taped to
prevent shorting. See wiring diagram
Figure 9
for
clarification and
Figure 5
for power connection
drawings.
Figure 9 HS9384-5H Transformer
Wired for 230 Volt Camera
For 24 volt cameras:
1. Installing a 24 volt camera into the HS9384-5H housing
utilizes the internal transformer for camera power (see
Figure 10
).
2. Connect the supply (230 VAC) to the Wago connectors
(provided).
3. Connect the secondary flying leads (white/black) to the
camera's 24 volt input. Refer to the wiring diagram for
clarification.
Figure 10 HS9384-5H Transformer
Wired for 24 Volt Camera
