Aidcall Astra 6000, Руководство по установке

Страница: 2 / 12

Doc No. FM5610 issue B Page 2
CONTENTS
Section Topic Page
1 Product Overview 2
2 Important Safety Instructions 3
3 Regulatory Information 4
4 Maintenance & Care 4
5 Transmitter Kit Features 5
6 Installation 6
7 Panel Setup 9
8 Replacing the PSU Battery 11
9 Specification 12
CONTENTS
1. PRODUCT OVERVIEW
The Astra 6000 Pager Transmitter kit (Aidcall P/No. E40104) includes the transmitter and antenna complete
with a 12V DC battery backed power supply unit. Pagers are bought separately, there’s no limit how many
can be used per system.
Note: the J25 was replaced by the Scope model in July 2016 – both are compatible with Astra Pagers.
The Transmitter requires connection to the PSU and the Pager Port on a Touchsafe Pro Nursecall Panel.
Staff will then be alerted to a call no matter where they are via their portable Pagers.
The system can be setup so all calls are reported to all Pagers at all times, or day/night groups can be set so
different Pagers can be alerted depending on the time of day. The types of call that are reported to the
Pagers can be set along with the beep pattern to identify different call types. Furthermore Pagers can be
configured into zones so calls are only notified to the staff responsible for specific areas.
Refer to the J25 Pager User Guide (Aidcall Doc No. FM5615) or Scope Pager User Guide (Aidcall
Doc No. FM5620) for details on setup and how the Pagers operate.
J25 Pager
(Aidcall Part No. W07280)
Scope Pager
(Aidcall Part No. W07600)