Fixing and Maintenance Instructions
7
CHAIR PLACEMENT (CONTINUED):
Caution:
Make sure there is no obstruction behind or in front of the chair for a safe recline and lift during operation.
The area between the seat and the footrest should be kept clear to avoid a pinching hazard while the
chair is operating.
PRODUCT CARE & STORAGE:
1. How to store
• Wipe the dust and dirt off. Keep the chair clean and away from places of high humidity.
• If the chair is not in use for a long period of time, cover it with a piece of clean cloth to protect it from
dust. Store in a dry room.
• Do not store the chair under direct sunlight or in places of high temperatures. This may result in the
fading of fabric colour.
2. Self-maintenance
• Before cleaning, ensure that the Main Switch is turned off and AC plug is removed for the electrical
outlet.
3. Main Body
• Very mild soap can be used to clean the plastic, pipe and upholstery of the chair. Carefully wipe away
all traces of the soap with dry cloth.
• To clean a dry spot, dip a piece of soft cloth into some warm soap water, wring the cloth dry, and apply
to the spot.
• Do not use cleaning agents like benzene or thinner, or any other cleaners which may result in fading
of fabric colour and scratching of upholstery.
• Do not remove the upholstery for washing. Ironing of upholstery is strictly prohibited.
• Please do not use wet towels/cloths to clean PU material. Please use leather cleaner and a dry towel
to clean the isurface of your chair.
BATTERY BACK UP SYSTEM:
These chairs are supplied with a battery back-up system to allow exiting the chair during a power failure.
Two 9 volt batteries are required and not supplied with the chair.
In the event of a power failure the chair will automatically switch over to battery power but only run for
one cycle before the batteries are discharged. It is recommended that the batteries are replaced after
each emergency use, and also checked periodically.
