AIC SILOX S Скачать руководство пользователя страница 4

This documentation is part of the product. It will be handed over to the end-user who will keep it, 

with all the other applicable documents, in a safe place and readily available for use.
Before installing, operating or maintaining the appliance, please carefully read this manual and all 

the applicable documents provided with the components and accessories. They contain essen-

tial safety information.

Symbols used in this Manual

Indicates an essential instruction  

which, if not followed, can result 

in a hazardous situation that can 

cause serious damage to equip-

ment and/or injuries or death.

Indicates an important instruction 

which, if not followed, could re-

sult in  a hazardous situation that 

could cause damage to equip-

ment and/or injuries.

Indicates an essential instruction 

in relation with the presence of 

electrical power and a danger of 

electrical shock

.

The electrical supply to the appli-

ance must be activated/deactivated 

through the external circuit breaker 

or the power supply cable must be 

connected/disconnected.

The primary and DHW circuits of the 

appliance must be full of water/empty.

Indicates an important piece of 

information.

i

i

Cold water inlet connection.

Domestic Hot Water outlet connection.

Primary circuit supply connection.

Primary circuit return connection.

4

I10_092-01 • SILOX S_EN

G

eneral

 I

nformatIon

About This Manual

Содержание SILOX S





















Отзывы: