10
I10_092-01 • SILOX S_EN
P
roduct
I
nstallatIon
î
The appliance must be in-
stalled in a dry and protect-
ed area, with an ambient
temperature comprised be-
tween 0 and 45°C.
î
Make sure to protect the appliance
and hydraulic system against freezing.
î
The appliance must be installed to en-
sure easy access at all times.
î
Make sure to use the appropriate tools
to avoid damaging the pipes and com-
ponents.
î
Install all pipes and ducts without stress
to prevent any leaks from occurring.
î
When the appliance is con-
nected to the electrical net-
work, it must be earthed.
î
Make sure that a fuse or circuit breaker
of the recommended rating is installed
outside the appliance, so as to be able
to shut the power down.
î
Before performing any operation on
the electrical circuit, isolate the electri-
cal supply of the appliance through the
external power-cutting device (fuse,
circuit breaker, etc.)
î
All connections must be carried out
in accordance with current standards
and regulations in force.
Safety Instructions for the Installation
Package Contents
î
A SILOX S twin-wall tank
î
An Installation and Maintenance manual
î
SX90S to SX190S - a wall bracket for vertical
installation on a wall
Optional Accessories (to be purchased
separately)
î
A safety group, comprised of:
- Pressure reducing valve (6 bar)
- Safety & check valve assembly,
- Expansion vessel
Unpacking the Product
1.
Carefully remove the packaging and protec-
tions.
2.
Discard packaging according to applicable
local regulations.
Installing and Preparing the Tank
î
Install the tank on the wall as required, using the
provided wall bracket (SX90S to SX190S mod-
els only).
î
Carry out hydraulic connections according to
“Hydraulic Connections” on page 13
.
