Importé par :
AIC International - 44980 Ste Luce sur Loire - France
-55-
Importé par :
AIC International - 44980 Ste Luce sur Loire - France
-56-
Faults experienced
The meter isn’t
The alarm doesn’t
The battery isn’t
Solution/how to resolve the problem
Faults experienced
Solution/how to resolve the problem
Check it has been correctly connected.
Check that the USB port used (computer,
mains adapter…) is receiving power.
Press the ON button.
Check the value set for the alarm (step
2).
Make sure the sound of the alarm has not
been disabled. Enable the sound if
necessary by pressing the designated
button (step 3).
The alarm is only available for the
measurement of CO2.
Check that the USB and micro USB ports
are properly connected.
Check that the USB port used (computer,
mains adapter…) is receiving power.
The software does
not recognise the
meter.
The measure-
ments aren’t being
recorded/saved.
Use the cable provided. The meter must
be properly switched on (ON position) to
be recognised.
Try the following two steps:
Turn on the meter and wait for it to warm
up. Connect the USB cable and start the
software.
Turn on the meter and wait for it to warm
up. Start the software. Then connect the
USB cable.
Go to step 6 to set the recording
parameters.
Follow step 7 properly to save the
recording.
Trouble-shooting:
