AIC GB207A-CT, Руководство пользователя

Страница: 18 / 48

2.4.2 Installing or Replacing 2.5” Hot-swap SAS/SATA HDD
g the unlock button and pinching slightly the
lock lever and pulling out the drive tray.
2. Firmly hold the tray lever and pull the drive out of the bay.
1. Release a drive tray by pressin
17

3. Place the 2.5” HDD on the tray and the ecure it with four screws on the
bottom.
n s
4. Insert the drive carrier into its bay. Push the tray lever until it clicks. Make
sure the drive tray is correctly secured in place when its front edge aligns
with the bay edge.
5. Repeat Steps 1 through 4 to install the rest of the 2.5" HDDs.
