AIC GB207A-CT, Руководство пользователя

Страница: 11 / 48

Chapter 2.
This section demonstrates maintenance procedures in replacing a defective part once
the GB207A-CT appliance is installed and is operational.
2
2.1.
o screws from both sides to open
the rear cover of the chassis.
2. Release two thumb screws from both sides and two screws from the mid-
top cover. Lift the cover up to open the mid-top cover.
e part once
the GB207A-CT appliance is installed and is operational.
2
2.1.
o screws from both sides to open
the rear cover of the chassis.
2. Release two thumb screws from both sides and two screws from the mid-
top cover. Lift the cover up to open the mid-top cover.
Hardware Setup
.1 Chassis Cover .1 Chassis Cover
1 Removing the Chassis Cover 1 Removing the Chassis Cover
1. Release six screws on the top cover and tw 1. Release six screws on the top cover and tw
2.1.2 Removing the Fan Duct
1. Remove the middle fan module by lifting it and pulling it out. Then remove
the fan duct on chassis.
10