AIC GB109-CT, Руководство пользователя

Страница: 41 / 43

40
5.5 Updating BMC Configuration
1. Boot to DOS (MS-DOS or Free DOS is workable)
2. Enter BMC config file directory [ XXXXX ZYY ];
XXXXX : barbone name; YY : config version
3. Execute the config.bat batch file to update config file
Example:
A :> cd G107N C 01
A:\ G107N C 01 >config.bat
This is just an example; the latest BMC configuration version is available from the
FAE or AIC website.
4. After update config file, please power off and then power on system.
Caution: System might encounter SERIOUS ISSUES WHEN THE WRONG
BMC FIRMWARE AND WRONG BMC CONFIGURATION IS UPDATED. EACH
BMC CONFIGURATION HAS A CORRESPONDING BMC FIRMWARE THAT HAS
BEEN TESTED AND APPROVED FOR EACH SPECIFIC PRODUCT. PLEASE MAKE
SURE FIRMWARE AND CONFIGURATION VERSIONS ARE CORRECT BEFORE
UPDATING. CONSULT THE AIC WEB SITE ( http://www.aicipc.com ) FOR THE
CORRECT COMBINATION OF FIRMWARE AND CONFIGURATION VERSIONS
FOR YOUR SYSTEM. PLEASE ALSO ENSURE THAT THE BMC FIRMWARE IS
UPDATED BEFORE THE BMC CONFIGURATION.
Note: 1.DO NOT USE EMM386 IN DOS ENVIRONMENT WHEN UPDATING
FIRMWARE OR YOU WILL GET A FAIL.
2.IN SOME CRITICAL CONDITION, AFTER UPDATING BMC
FIRMWARE OR CONFIG FILE, YOU MIGHT NEED TO UNPLUG AC POWER
CORD 5 SECONDS AND THEN PLUG AC POWER CORD TO RESET BMC,
THEN UPDATED NEW FUNCTION CAN WORK PROPERLY.
40
5.5 Updating BMC Configuration
1. Boot to DOS (MS-DOS or Free DOS is workable)
2. Enter BMC config file directory [ XXXXX ZYY ];
XXXXX : barbone name; YY : config version
3. Execute the config.bat batch file to update config file
Example:
A :> cd G107N C 01
A:\ G107N C 01 >config.bat
This is just an example; the latest BMC configuration version is available from the
FAE or AIC website.
4. After update config file, please power off and then power on system.
Caution: System might encounter SERIOUS ISSUES WHEN THE WRONG
BMC FIRMWARE AND WRONG BMC CONFIGURATION IS UPDATED. EACH
BMC CONFIGURATION HAS A CORRESPONDING BMC FIRMWARE THAT HAS
BEEN TESTED AND APPROVED FOR EACH SPECIFIC PRODUCT. PLEASE MAKE
SURE FIRMWARE AND CONFIGURATION VERSIONS ARE CORRECT BEFORE
UPDATING. CONSULT THE AIC WEB SITE ( http://www.aicipc.com ) FOR THE
CORRECT COMBINATION OF FIRMWARE AND CONFIGURATION VERSIONS
FOR YOUR SYSTEM. PLEASE ALSO ENSURE THAT THE BMC FIRMWARE IS
UPDATED BEFORE THE BMC CONFIGURATION.
Note: 1.DO NOT USE EMM386 IN DOS ENVIRONMENT WHEN UPDATING
FIRMWARE OR YOU WILL GET A FAIL.
2.IN SOME CRITICAL CONDITION, AFTER UPDATING BMC
FIRMWARE OR CONFIG FILE, YOU MIGHT NEED TO UNPLUG AC POWER
CORD 5 SECONDS AND THEN PLUG AC POWER CORD TO RESET BMC,
THEN UPDATED NEW FUNCTION CAN WORK PROPERLY.