16
2.4 Drive Bays
2.4.1 Installing or Replacing 3.5” Hot-swap SAS/SATA HDD
1.
Release a drive tray by pressing the unlock button and pinching slightly the
lock lever and pulling out the drive tray.
2.
Firmly hold the tray lever and pull the drive out of the bay.
3.
Place the 3.5” HDD on the tray and then secure it with four screws from the
both sides of HDD tray.
4.
Insert the drive carrier into its bay. Push the tray lever until it clicks. Make sure
the drive tray is correctly secured in place when its front edge aligns with the
bay edge.
5. Repeat Steps 1 through 4 to install the rest of HDDs.
16
2.4 Drive Bays
2.4.1 Installing or Replacing 3.5” Hot-swap SAS/SATA HDD
1.
Release a drive tray by pressing the unlock button and pinching slightly the
lock lever and pulling out the drive tray.
2.
Firmly hold the tray lever and pull the drive out of the bay.
3.
Place the 3.5” HDD on the tray and then secure it with four screws from the
both sides of HDD tray.
4.
Insert the drive carrier into its bay. Push the tray lever until it clicks. Make sure
the drive tray is correctly secured in place when its front edge aligns with the
bay edge.
5. Repeat Steps 1 through 4 to install the rest of HDDs.
Содержание GB109-CT
Страница 34: ...33 3 Input subnet mask address 33 3 Input subnet mask address...
Страница 43: ...42 Note 42 Note...
