SSA-10000 is high-powered amplifier. Therefore it is very important that correct loudspeaker connections
are made to avoid damage to the amplifiers or speakers.
Low Impedance Speaker Connections
l
Box type Speakers can be directly connected to Com-
2
/
4
Terminal
Strip.
l
The Box Speaker / Driver Unit switch must be kept at Box
Speaker position. If by mistake the switch remains in
Driver Unit position the quality of sound will not be rich
and natural.
l
No Driver Units / Horn Speakers / Column Speakers
(with 100V LMT) should be connected to Com-
2
/
4
.
Connecting Eight SAX-150DX Speakers
The Eight SAX-150DX Speakers (each speaker can
handle 150W of power) should be wired in a parallel-
series combination as shown in figure. Two groups of
four speakers each are connected in parallel and then
the groups are connected in series. The resulting
impedance will be 4 . The speaker system should be
connected to the 4
tap of the amplifier.
Connecting Ten SRX-120DX Speakers
The Ten SRX-120DX speakers (each speaker can
handle 100W of power) should be connected in parallel -
series combination as shown in figure. Two groups of five
speakers each are connected in parallel and then the
groups are connected in series. The resulting
impedance would be 3.2
.
Thus they should be
connected to the 2 tap of the amplifier.
Connecting Four SAX-300DX Speakers
The Four SAX-300DX Speakers (each speaker can
handle 300W of power) should be wired in parallel shown
in figure. The resulting impedance will be
2
. The
speaker system should be connected to the
2
tap of
the amplifier.
IMPORTANT
l
When Box speakers are connected to COM-
2
/
4
Terminal Strip NO Speakers / Driver Units with 100V
LMTs should be connected to the Red Terminal Strip marked COM-70V/100V.
l
Box Speakers should be connected only to either COM-
2
or COM-
4
terminals as illustrated above but
never to more than one set of terminals.
REAR PANEL - SSA-10000
8
Interconnections....
SSA-10000
12 Volts
12 Volts
+
+
12 Volts
12 Volts
-
+
-
+
-
-
KEYBOARD
COLUMN
SPEAKERS
WITH 100V
LMT
HORN
SPEAKERS
WITH 100V
LMT
CEILING
SPEAKERS
WITH 100V
LMT
WALL
SPEAKERS
WITH 100V
LMT
CASSETTE RECORDER
PA MIXER
CASSETTE PLAYER
CD PLAYER
PLAY/PAUSE
STOP
SKIP/SEARCH
REPEAT
MEMORY
TRACK
OPERATION INDICATOR
PLAY
REPEAT
PROGRAM
OPEN/CLOSE
COMPACT
DIGITAL AUDIO
POWER
COMPACT
DISC
PLAYER
DIGITAL
PROGRAM SPEAKERS
MICROPHONES
AMX-1412
BOOSTER AMPLIFIER
• Speaker Connection Guidelines
Resultant Impedance = (8 ohm/4) = 2 ohm
9
2
4
COM
Resultant Impedance = (8 ohm/4) x 2 = 4ohm
Resultant Impedance = (8 ohm/5) x 2 = 3.2 ohm
SRX-120DX SRX-120DX SRX-120DX SRX-120DX
SRX-120DX
SRX-120DX SRX-120DX
SRX-120DX SRX-120DX
SRX-120DX
8
8
8
8
8
8
8
8
8
8
COM
2
4
SAX-150DX
SAX-150DX
SAX-150DX
SAX-150DX
SAX-150DX
SAX-150DX
SAX-150DX
SAX-150DX
8
8
8
8
8
8
8
8
COM
2
4
SSA-10000
COM
2
4
+
-
SAX-300DX
8
+
-
SAX-300DX
8
+
-
SAX-300DX
8
+
-
SAX-300DX
8
