31 DC MCB (Rating 32AMP 130V DC)
37. AUX-1 Input Jack Socket
This switches off when excessive current flows
For accepting an unbalanced signal from an
due to overload or short circuit. Rectify the fault &
auxiliary source like a Tuner, Cassette Player, or
switch on this MCB for normal operation of
Echo unit.
amplifier. Fault indication is given by overload
38. PREAMPLIFIER Output Jack Sockets
LED (No. 21) in the front panel.
For connecting to a cassette recorder for
32. 3 CORE AC MAINS CABLE WITH PLUG
recording purpose.
33. EARTH Terminal
39. AUX-2 Input Jack Socket
34. SPEAKER Terminal Block (70V, 100V)
40. LINE Output Jack Socket
For connecting speakers with 100V line matching
For connecting to a another amplifier to obtain
transformers.
combined higher power output.
35. SPEAKER Terminal Block (2 ohm and 4 ohm)
41. AUX-3 Input Jack Socket
For connecting low impedance speakers.
42. AUX-4 (CD) Input RCA Socket
36. LINE Input Jack Socket
For connecting a CD/DVD players.
For connecting inputs such as an external Mixer
43. BATTERY Terminal Block
to enhance the number of inputs. Also, line output
For connecting four 12V Car Batteries in series
of another amplifier can be connected here for
(which becomes 48V) as standby power source.
cascading multiple amplifiers.
• Rear Panel Controls & Features (SSA-10000)
CAUTION
l
The equipment must be earthed properly before operating it to avoid electric shock. A wire from the Earth
Terminal must be connected to electrical earth for safe operation.
l
When connecting any other equipment to this amplifier take suitable steps to avoid additional earthing loops
due to multiple earthings.
6
SSA-10000
31
34
35
33
32
36
38
40
42
37
39
41
43
• Interconnections
l
The amplifier can be placed as a tabletop unit. The amplifier should be
situated so that its location or position does not interfere with its proper
ventilation.
l
The amplifier must be powered through an AC earthed mains outlet.
l
All connections must only be carried out or changed with the amplifier
switched OFF.
l
The amplifier may be operated from a DC supply of 48 Volts (four car
batteries connected in series).
l
To avoid loud switching noise, always switch ON the Power amplifier
after all other units of the audio system have been switched ON. After
operation switch it OFF first, then the other units.
l
The connection diagrams that follow display the typical types of input
sources (Mics, Keyboard, Cassette Player, Mixer, CD Player etc.) and
speakers (Wall, Ceiling, Box, Horn, Column) which can be connected
to the amplifier. For correct connections and operation check the
specifications of the connected equipment.
PAGING
MICROPHONE
OFF
ON
WIRELESS
MICROPHONE
MICROPHONE
SIGNAL
SIGNAL
CH-1
PROFESSIONAL WIRELESS MICROPHONE RECEIVER
VOLUME
VOLUME
CH-2
VHF DUAL CHANNEL
AWM-490V2
POWER
RECEIVER
7
SSA-10000
FRONT PANEL - SSA-10000
