AHT HTK-500ST/AL, Руководство по установке

Страница: 6 / 34

INSTALLATION INSTRUCTIONS
Position the tailgate unit
- Position the main frame
- Install the mounting brackets on the main frame, but do not fix it.
- Place the main frame under the vehicle with lift arms attached using a floor jack, and
raise main frame to its approximate final position.
- Be sure to lubricate all pin surfaces before installing the pins.
- Raise the hoisting unit to the mounting device, remembering that the lift cylinders will
come apart if raised too high. (If necessary, raise the main frame closer to the vehicle chassis.)
- Install pins (Lift arm - platform) between
mounting device and hoisting unit.
- The main frame must be parallel with the
body.
- IMPORTANT: SEE “TAILGATE KINEMATICS” THE
MAXIMUM AND MINIMUM MEASUREMENTS MUST BE
KEPT.
- Displace the power pack
- Before you can fix the mounting brackets, you have to
displace the power pack.
6
Loosen the 4 screws
M10x25 on the power
pack
Now displace the power pack
It is not necessarry to remove any hydraulic hoses, fittings
and electric wirings.