AHT BabyPod 2 Скачать руководство пользователя страница 4

Страница: 4 / 24

BabyPod 2 consists of a lightweight carbon fibre outer shell, which is lined with a shock absorbent foam inner

layer, and has a transparent lid for viewing the baby. BabyPod 2 contains a patient positioning vacuum mattress,

stretcher fixing straps to secure the device for transport, and safety straps to position the infant inside the device

during transport. Accessories available for BabyPod 2 include the Single-use TransWarmer Infant Transport

Mattress. BabyPod 2 is designed to provide safe conveyance of patient whose weight does not exceed 17.5 lbs

(8 kg.)

Section 2.2 - Indications

BabyPod 2 is designed to safely convey a paediatric patient to or from a medical facility, between facilities or

between departments within a single medical facility. BabyPod 2 is designed to provide safe conveyance of a

patient whose weight does not exceed 17.5 lbs (8 kg.)

BabyPod 2 has been designed to

exceed

the standard CEN 1789 (10g in six directions).

Section 2.3 - Components

Part Number

Component Description

BP2-001

BabyPod 2 Infant Transport Device

BPOD2-002

Vacuum Mattress (BP2-002)

BPOD2-003

Infant Positioning Strap Set (BP2-003)

BP2-005

Shock Absorbent Foam Set

BP20-006

9kn Stretcher Fixing Strap Set (BP2-006)

BP2-007

Viewing Lid Set

BP2-012

Protective Storage Cover

TRANS01

TransWarmer Infant Transport Mattress - Single

Section 2.4 - Accessories

USE ONLY

BabyPod 2 approved accessories with this device. Patients may be harmed by the incorrect use of this

device.

Part Number

Description

BP20-006 Aero

9kn Stretcher Fixing Strap Set - Aero (BP2-006 Aero)

BP2-013

Protective Carry Bag

BPOD2-020

Vacuum Pump (BP2-020)

TRANS06

TransWarmer Infant Transport Mattress (Set of 6pcs)

Section 2

Indications for use

Section 2.1 - Product Description

Содержание BabyPod 2

























Результаты поиска

Содержание BabyPod 2

Отзывы:

Похожие инструкции для BabyPod 2

Бренды по названию

Популярные бренды

AHT BabyPod 2, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание BabyPod 2

Отзывы:

Похожие инструкции для BabyPod 2

Бренды по названию

Популярные бренды