AHT INSIDE Petmate User Manual
14
Residual risks
In the design stage the manufacturer
AHT IndustrialGroup Srl
has carried out a thorough analysis of risks
on the product
concerned.
From this analysis unavoidable risks have emerged which cannot be eliminated for their nature.
These risks
were examined individually and in this manual have been emphasized the directions on how to avoid them.
It is
therefore important that any user who should
install,
connect, operate and maintain the
product
has previously read
the manual.
NOTE
THE MANUFACTURER
CANNOT BE HELD RESPONSIBLE FOR
INCIDENTAL OR CONSEQUENTIAL
DAMAGES DUE TO NOT INTENDED USES OF PLYTERM
AS A
RESULT OF
NEGLIGENCE ON PART
OF A
USER.
As a result of the risk analysis,
residual risks
have emerged and have been
highlighted in this
manual of use and
maintenance and an explanation was provided on how to avoid them.
In particular :
•
In the paragraph
Safety regulations,
the proper procedures
to follow in case of
PETMATE
anomalies are
indicated
•
In
section 3 the correct procedure of
installation and
connection of
PETMATE
to
the electrical line are
indicated.
T
he correct location of the product has been specified in
Areas of use
•
It is absolutely prohibited to bring any changes
on
PETMATE.
Any damage to people, animals or things resulting
from the use
of the incorrectly modified product
by an operator not authorized by the manufacturer, raises
AHT
Industrial Group Srl
from any responsibility.
•
Keep this manual and its attachments, necessary for proper and safe use
of
PETMATE
.
•
In case
the upper surface of a module
presents sharp corners or sharp edges , these are surely due to an
error
in the production phase.
Contact the manufacturer
AHT Industrial Group Srl
and follow their instructions.
In the operations of installation, maintenance and dismantling of the product
it is necessary to provide the use of
Personal Protective Equipment (PPE) such as:
-
Clothing:
Who carries out
the installation,
connection,
maintenance and dismantling
of
PETMATE
must
compulsorily
wear
a
clothing that must comply with the essential requirements of safety.
You must wear accident prevention shoes with non-slip soles;
other types of footwear are note permitted.
-
Gloves:
In the
installation
phase,
connection, maintenance and dismantling of
PETMATE
you must also use gloves of
Class I
in.
