AHT INSIDE Petmate User Manual
10
NOTE
FAILURE TO OBSERVE THE
INTERVENTION AND USE
PROCEDURES
OF
PLYTERM
DESCRIBED
IN
THIS DOCUMENTATION ( MANUAL FOR USE AND
MAINTENANCE),
RESULT IN THE EXPIRY OF
WARRANTY TERMS.
GENERAL SAFETY STANDARDS
Warning
This chapter describes the basic safety rules to be observed during any operation involving
PETMATE
.
The intervention
procedures,
described in the following chapters must be carried out respecting both the manner of performance
indicated, and the general safety rules of this chapter.
The safety rules and procedures of use and maintenance of these manuals are an addition to the general safety
standards
and standards of safety
at work which should be respected in any case.
Different
nations
can have different safety regulations.
It should be noted, therefore, that in all cases where the rules
of the manuals are in conflict or reductive compared to industry or nation’s standards where
the
product
is used,
industry and nation’s standards will have priority value on those manuals.
NOTE
THE MANUFACTURER CANNOT
BE HELD RESPONSIBLE IN ANY WAY FOR ACCIDENTS OR
DAMAGES RESULTING FROM AN INAPPROPRIATE USE OF
PLYTERM, AS WELL AS THE PARTIAL
INOBSERVANCE OF THE SAFETY RULES AND PROCEDURES DESCRIBED IN THE MANUAL
INTERVENTION.
The non-observance of the operating rules and methods of intervention,
installation, connection, use and
maintenance
of
PETMATE
contained in this manual will void the warranty.
Safety standards
During
the connection
and
the
subsequent use, incorrect functioning conditions may occur which are not foreseen in
the manual.
These situations, totally abnormal , can sometimes be caused by environmental factors or by unforeseen fortuitous
failures by the manufacturer.
In case there is
any unforeseen abnormality during the
using phase of the product,
it is recommended to follow the
following procedure:
•
Disconnect
the system from the home wiring
(see
Section 3 -
connection).
•
Immediately contact Technical Support.
