AHP WELDS alphaTIG 203Xi, Руководство оператора

Страница: 7 / 32

7
Safety Warnings, Dangers, Cautions and Instructions
DANGER! Welding and cutting operations pose serious inhalation hazards. Some of these hazards
are immediate while others are cumulative in their effect. Do not weld in enclosed spaces or in
areas without adequate ventilation. Fumes and gases released in the welding and cutting opera-
tions can be toxic. Use fans or respiration equipment to insure adequate ventilation if you are
welding in a shop or garage area. Do not weld on galvanized metal under any circumstance. You
may develop metal fume fever. Symptoms are similar to lu
- like symptoms. Seek medical advice and
treatment if you are exposed to galvanized welding fumes.
If you experience any eye burning, nose or throat irritation while welding, these are signs that you
need more ventilation.
If you feel these symptoms:
•
Stop work immediately and relocate work area with better ventilation.
•
Wash and clean your face and hands.
•
Stop work completely and seek medical help if irritation persists
DANGER! Never use brake cleaner or any chlorinated solvent to clean or degrease metal scheduled
to be welded or other related equipment in the area being welded. The heating of this cleaner and
its residue will create highly toxic phosgene gas. Small amounts of this vapor are harmful and
can lead to organ failure and death. If degreasing of a part is necessary, use Acetone or an ap-
proved pre
- weld cleaner. Use the proper personal protective equipment (PPE) when handling any
cleaners/solvents.
DANGER! People with pacemakers should consult a physician and pacemaker manufacturer before
welding. There is a potential for damage or serious malfunction resulting in death. High Frequen-
cy energy (HF)/Electromagnetic Fields generated during welding can interfere with pacemaker sig-
nals, even permanently damaging it. Some pacemakers offer some shielding, but restrictions re-
garding amperage and HF starting of TIG arcs may be placed upon the individual. Warn all poten-
tial bystanders that they should exit the work area if they have a pacemaker or similar medical
equipment before welding. Severe electrical shock leading to injury or death may occur while using
the plasma cutter if the user becomes part of the circuit path. While the Amp output of the plasma
cutter is limited, the unit may produce an OCV of 300V or greater. Consult with a Physician if a
pacemaker is expected to be implanted.
DANGER! Never defeat or modify any safety guards or shields. Keep all safety covers and shields
in place.
Never place your fingers in or near a fan shroud or insert any object into the fan(s).
CAUTION! Trip Hazards exist around welders. Cords, cables, welding leads and hoses pose a trip
hazard. Be aware of their location and inform others of their location. Tape and secure them so
they will stay out of high traffic areas.