AhnLab TrusGuard Скачать руководство пользователя страница 91

Страница: 91 / 120

Chapter3 Installation

System Time

The logs recorded by the system, remote backup and firewall policies are all based on time. You must

set the time accurately.



The

Time Zone

(GMT +09:00) Seoul, Tokyo



For the

Time Setting Method

, select

Synchronize with Time

Direct Input



If you choose to synchronize with the time server, specify the

Server Address

(203.248.240.103,

domain or IP address) and

Auto Update

time (

Sun 12:00

, Sunday to Saturday, 00:00 to 23:00).



If you choose

Direct Input

, click the calendar icon (

) and click the date, or enter the date in the

format of YYYY-MM-DD, and the time in hh:mm:ss.

Note

In TrusAnalyzer, this time is shown as “Received Time”.

System Language

The logs, web interface an SSL VPN starting page will be in the language you choose. Only Korean and

English are supported now.

Caution

If you change the language while operating the system, the logs recorded before the change will get initialized

in Monitor Center, and will no longer be available. Logs already sent to TrusAnalyzer will not get affected.

Note

You can also choose the language from the login window. Japanese and Chinese are on the list, but

currently not supported.

Содержание TrusGuard

























































































































Результаты поиска

Содержание TrusGuard

Отзывы:

Бренды по названию

Популярные бренды

AhnLab TrusGuard, Руководство по установке

Результаты поиска

Содержание TrusGuard

Отзывы:

Бренды по названию

Популярные бренды