ahlsell ENERGY FLEX SKP 20, Руководство пользователя, Страница: 9 / 16

9 SKP 20
The device will show the current setpoint of the
machine, which is 12.0 degrees centigrade in this
case).
To increase or decrease this, press the “up” and
“down” keys again.
For example, if you want to change the setpoint
to 12.5 degrees, press the “up arrow” key until
you reach the required value.
On reaching the required value, press the set key.
The device will save the value 12.5.
Press the esc and set keys together to open the
parameters menu. This will open the PAr menu.
The PAr parameters menu contains all controller
parameters. Press the set key to view folders.
The first folder the controller shows is the CF
configuration folder.
Simply press the set key again to modify individual CF
parameters.
The controller will show parameter CL00 (factory
default settings).
Press the “up” key to scroll through the various
parameters or move to the next parameter (CL01 in
this case) or the “down” key to go back to the previous
parameter (CL97 in this case)
CL00->CL01->CL02->…->CL97->CL00
CL97<-CL00<-CL01->…<-CL96<-CL97
NOTE: -> UP, <-DOWN
Press the set key to change the value of the parameter
(CL01 in this case).
Press the “up” and “down” keys to change the value of
the parameter (CL01 in this case).
On selecting a value, press the set key. **
To exit this display and return to the previous level,
press the esc key.
**N.B. pressing the set key confirms the modified
value; pressing the esc key returns you to the previous
level without saving the new value entered.
Example display and reset hours
for Pump 1.
Press the set key from the main
display.
Label Ai appears on the display.
Use the UP and DOWN keys to
scroll the other labels until you
find the Hr label.
Press the set key to view the first
label - which in this case is the
running time for compressor 1
(CP1)
Scroll with the UP and DOWN keys
to view (if the relative resources
are present) the running time for
compressor 1 (CP1) the the pump
running time (PU1)
The running time is 5 hours.
To clear pump PU1 running time,
press and hold the [set] key.
-------------------------------------
Press the esc key to go back to the
main display.
1.3.7 Reset compressor/pump time
1.3.8 Parameters (folder PAr)
Modifying a parameter
Instructions are provided below on how to change a machine parameter. By way of example, let’s
look at the CF configuration parameters folder, parameter CF00 (folder PAr/CF/CF00).