ahlsell ENERGY FLEX SKP 20, Руководство пользователя

Страница: 4 / 16

4 SKP 20
1. User interface
1.1 Keys
1.2 Functions description
Preliminary precautions
• The control panel allows you to make all the necessary adjustments to the chiller operation and to view the values of the
main parameters and alarms. The control panel is located on the front panel of the electrical board.
1.1 Keys
The interface, comprising the front cover of the controller, allows you to perform all operations
needed to use the device.
The terminals are the same and are interchangeable – see table.
•
SKW22(L) There are 4 keys on the front cover of the controller.
• SKWP22(L) There are 5+3 keys on the front cover of the controller.
Each key has (see the two tables below)
•
A direct action (shown on the key itself).
• An “associated” function (for SKW22(L): marked with an icon on the front panel of the termi-
nal beside the key). In the manual, this is shown in square brackets (e.g. [UP])
• A combined action using 2 keys. In the manual, this is shown in square brackets
(e.g.[UP+DOWN])
1.1.1 Description of keys
1.1.2 Description led utilities
Icons associated with utilities are all configurable. From the factory device is set to the table:
Key
Press once
(press and release)
Long press
(press and hold for about 3 seconds)
1
Increase a value.
Go to next label.
see also F1
[Activate manual defrost]
See the Functions menu (folder FnC).
2
Decrease a value.
Go to previous label.
see also F3
[Machine active
→
OFF]
[OFF
→
machine active]
See Local On/OFF section.
See also Functions menu.
(FnC folder)
3
Confirm value / exit and save new settings.
Move to next level
(open folder, subfolder, parameter, value).
Open State Menu.
Open Edit Mode
(Main display)
See Main Display section.
4
Exit menu page / go back to previous menu.
Move cursor to left in Edit Mode.
(press and hold)
Exit Edit Mode without saving.
see also F2
(Mode Change)
See section on Changing operating mode.
5 Open Programming menu /
Tasto
Pressione singola
(premi e rilascia)
Pressione prolungata
[premi per 3 secondi circa]
Note
[F1+F3] / [Riarmo manuale degli allarmi]
F1 / [Attiva sbrinamento manuale]
Vedi Tasto UP
pressione prolungata
F2 / [Cambio modo]
Vedi Tasto esc
pressione prolungata
F3 /
[Macchina attiva

OFF]
[OFF

macchina attiva]
Vedi Tasto DOWN
pressione prolungata
<IMG INFO>
1 Compressor 1
2 Compressor 2
3 Sanitary water
4 Boiler
5 Exchanger electric heater
6 Fan-coil
7 Water pump
1 2 3 4 5 6 7