Ahlborn ALMEMO 500, Дополнительное руководство по инструкции

Страница: 6 / 8

- 6 –
2
How to use Almemo
®
Control when the
Transparent Mode is activated
2.1
How to use Almemo
®
Control via WLAN or Ethernet
1.
Connect the data logger via Ethernet or WiFi to a PC (see Instruction
Manual chapter 7.4.1 Connect PC to the data logger).
2.
Open the ALMEMO ® Control program.
3.
Click on Interface.
4.
Click on the tab IP Network
5.
Enter the IP address in the field next to IP address or host .
The IP address is displayed in the status display.
6.
In the field next to Port enter 10001.
7.
Click on Ok.
8.
Click on Search for connected devices.
➢
Every measuring circuit board will be listed individually in the device list.
2.2
How to use Almemo
®
Control via USB
1.
Connect the data logger via USB to a PC (see Instruction Manual chapter
7.4.1 Connect PC to the data logger).
2.
Open the ALMEMO ® Control program.
3.
Click on Interface.
4.
Click on the tab Serial Interface.
5.
Click on Auto-detect the baud rate.
6.
In the drop-down menu Interface select the COM-Port.
7.
Click on Ok.