1 How to activate or deactivate the Transparent Mode
- 4 –
Alternatively
→
Deactivate the Transparent Mode via the app as described in chapter 2.
➢
The ALMEMO
®
500 app will display the message
Transparentmode off!
1.2
How to control the Transparent Mode via the
ALMEMO
®
500 app
Activate the Transparent Mode
!
The data logger needs to be switched on.
!
The data logger needs to be connected to the power supply (see Instruction
Manual chapter 7.1.1 How to connect and check the Power Supply).
In battery operation (no mains adapter connected) the Transparent
Mode cannot be activated. In case a battery pack is used in your
system for the time of activated Transparent Mode the datalogger
must be connected to the power supply.
!
The tablet must be connected to the data logger (see Instruction Manual
chapter 6 Initial Operation, step 6 to 20).
1.
In the home screen of the app, tap on the button
.
2.
Tap on the arrow
>
next to
Settings.
3.
Tick the checkbox next to
Transparent-Mode
by tapping on the checkbox.
➢
The Transparent-Mode will be
activated.
➢
The Transparent Mode is ready for
use as soon as the message
“ACTIVATED” pops up in the status
display.
➢
The ALMEMO
®
500 app will display the message
Transparentmode on!
➢
When the Transparent Mode is activated, the measuring circuit boards can
be directly addressed via the ALMEMO
®
Control program to perform a
comparison, a multi-point adjustment, or to enable options.
Transparent Mode
ACTIVATED
192.168.1.204
