1 How to activate or deactivate the Transparent Mode
- 3 –
2.
Press both navigation keys at
once.
➢
The menu “Transparent Mode” will
be displayed.
3.
Press the left one of the Navigation
keys one time.
➢
The Transparent Mode will be
activated.
➢
The Transparent Mode is active as
soon as the status display shows
“ACTIVATED”.
➢
The ALMEMO
®
500 app will display the message
Transparentmode on!
4.
Connect the data logger via Ethernet or WiFi to a PC (see Instruction
Manual chapter 7.4.1 Connect PC to the data logger).
5.
Open the ALMEMO
®
Control program.
6.
Click on
Interface.
7.
Click on the tab
IP Network.
8.
Enter the IP address in the field next to
IP address or host
.
The IP address is displayed in the status display.
10.
In the field next to
Port
enter 10001.
10.
Click on
Ok.
11.
Click on
Search for connected devices.
➢
When the Transparent Mode is activated, the measuring circuit boards can
be directly addressed via the ALMEMO
®
Control program to perform a
comparison, a multi-point adjustment, or to enable options.
Deactivate the Transparent Mode
→
Push one of the Navigation keys.
Alternatively
→
Turn the data logger off and then on again.
Transparent Mode
Enter?
Yes
No
Transparent Mode
ACTIVATED
192.168.1.204
