8
The following connections are all found on the back/bottom side of PCI 1200:
1. Connector for 10 meter Emergency Empting System Cable and
Emergency Stop Button. (Optional: - art. no.: 9501 3006.)
Connector with jumper (art. no.: 9700 0003) installed.
2.
Connector for 24V DC Signal Lamp / Audio emitter.
(Optional: - art. no.: 4000 0130 / 4000 0135).
3. Connector for Door Stop Switch and Cable (1 door).
(Optional: - art. no.: 0502 - 1002 0012).
Connector with jumper (art. no.: 0502 - 9700 0002) installed.
4. Connector for 100-230 VAC Supply power (50-60 Hz)
with 500 mA fuse (Art. no.: 3013 1212).
5.
Air Out - exhaust air with muffler/silencer (art. no.: 2031 2000).
6. Air Out
– Hose nipple connector (ø7 – ¼”) for tire air hose.
(Art. no.: 2022 0812)
7. Air In
– Hose nipple connector (ø9 – ¼”) for supply air-pressure from
compressor-line (Art. no. 2022 0913).
8.
Assembly screw for the cabinet (4 pcs.).
9.
Block valve.
10.
Magnetic valve (Normally Closed - NC) - Inlet air.
11.
Magnet valve (Normally Open - NO) - Outlet air.
12.
M5 thread for mounting (3 pcs.).
Operations Guide
- Connect the 230V to the Inlet Power Connector (position 4).
- Connect pressurized air supply from the compressor (position 7).
- Connect the wheel air hose to the Tire Air out Connector (position 6).
