AHB BATTERY BOOSTER LITHIUM 600, Руководство пользователя

Страница: 4 / 11

BA
TTER
Y BOOSTER LITHIUM 600
BA
TTER
Y BOOSTER LITHIUM 600
BA
TTER
Y BOOSTER LITHIUM 600
BA
TTER
Y BOOSTER LITHIUM 600
AHB-Bestellwege · Tel. 0 21 73 / 1 64 -0 · Free Fax 0800 / 2 42 32 93 ·
www.ahb-international.com · www.ahb-shop.com
AHB-Bestellwege · Tel. 0 21 73 / 1 64 -0 · Free Fax 0800 / 2 42 32 93 ·
www.ahb-international.com · www.ahb-shop.com
6 7
How to Jump Start a 12V Vehicle
1. Make sure there are at least 3 indicator lights glowing.
2. Connect the red battery clamp of the jumper cable to the vehicle’s positive (+)
battery pole and connect the black battery clamp of the jumper cable to the
vehicle’s negative (-) battery pole
3. Plug the other end of thejumper cable into the 12V/2A output for the jump
starter cable of the “ Battery Booster Lithium 600”.
4. Activate the ON/OFF-switch and press the “Power” button.
5. Start the car engine.
6. Once the engine is running, remove the jumper cable from the „Battery Boos-
ter Lithium 600“ and disconnect the red and black clamps from the vehicle’s
battery poles within 30 seconds after the engine of the car started running.
7. Leave the vehicle’s engine running.
How to charge Electronic Devices via USB
1. Plug the “cable B” into the 5V/2A USB output of the „Battery Booster Lithium 600“.
2. Select the appropriate connector for your device and plug it into your device.
3. Activate the ON/OFF-switch and press the power button to charge your device.
How to charge Your Notebook/Laptop
1. Plug the “cable A” into the 19V/3.5A output of the „Battery Booster Lithium 600“.
2. Select the appropriate connector for your notebook/laptop and plug it into
your device.
3. Activate the ON/OFF-switch and press the power button to charge your device.
How to charge Your 12V Product
1. Plug the cable for 12V products into the 12V/1A output of the
„Battery Booster Lithium 600“ and into your device.
2. Activate the ON/OFF-switch and press the power button to charge your device.
Warning!
1. Il may be dangerous to keep the „Battery Booster Lithium 600“ connected to
the vehicle’s battery for more than 30 seconds while the engine is running.
Therefore, you need to remove the red and black clamps from the vehicle’s
battery poles within 30 seconds after the engine started running.
2. Do not decompose the product. Otherwise, it may cause danger.