38
EN
4
The measurement will start automatically as
soon as the distance sensor determines the
correct distance (Do not move the thermometer
while measuring. The measurement will take
approximately 1 second).
5
The display will show the body temperature
measurement result. The thermometer will
signal the end of the measurement with a
beep and the display backlight will turn on.
OBJECT TEMPERATURE MEASUREMENT
1
To measure object temperature, turn on the
device by pressing the
button once.
2
The display will show the result of the previ-
ous measurement (if the measurement was
made earlier).
3
Bring the thermometer to the measuring
area so that there is a distance of up to 5 cm
between the sensor and the surface.
4
Press the
START
button 2 times. The ther
-
mometer will switch to object measurement
mode and measure the temperature.
5
The display will show the
object temperature meas-
urement result. The ther-
mometer will signal the
end of the measurement
with a beep and the display back
-
light will turn on.
When temperature
reaches 37.4 ° C (or below),
green backlight will turn on.
When temperature
reaches 37.5 ° C (or higher),
red backlight will turn on.
