Agu Eaglet IHE3, Руководство пользователя

Страница: 65 / 100

65 EN
ELECTROMAGNETIC COMPATIBILITY TABLES
Medical Electrical Equipment needs special precautions regarding EMC and
needs to be installed and put into service according to the EMC information.
1
Electromagnetic/Radio Frequency Interference (EMC/RFI):
readings may be affected if the unit is operated within radio frequency
electromagnetic field strength of approximately 3 volts per meter, but
the performance of the instrument will not be permanently affected. Care
should be taken to keep the Infrared thermometer
AGU IHE3
at least
6 inches away from R/C transmitters to avoid radio frequency interference.
2 Avoid keeping the Infrared thermometer AGU IHE3 too close to objects
that continuously generate high heat (like a hot plate) for long periods of
time, which can cause overheating of the thermometer.
Table 1. For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer’s declaration – electromagnetic emissions
Infrared thermometer AGU IHE3
is intended for use in the electromagnetic
environment specified below. The customer or the user of the Infrared
thermometer AGU IHE3 should assure that it is used in such environment
Emissions test Compliance Electromagnetic environment guidance
RF emissions CISPR 11 Group 1 Infrared thermometer AGU IHE3
uses RF energy only for its internal
function. Therefore, its RF emissions
are very low and are not likely to cause
any interference in nearby electronic
equipment
RF emissions CISPR 11 Class B Infrared thermometer AGU IHE3 is
suitable for use in all establishments
other that domestic and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic purposes
Harmonic emissions
IEC 61000-3-2
Not
applicable
Voltage fluctuations/
Flicker emissions
IEC 61000-3-3
Not
applicable