Installation-, Operating-, Maintenance-Manual, Spare Part List
BCR02
AGT-PSG GmbH & Co.KG
Errors and printing mistakes excepted
Page 8
Translation - Manual BCR02 Rev. 6/2016
Assembly and Installation
Feed Lines
All operations mentioned below to be performed by qualified personnel only.
As a standard, medium connections of the sample gas cooler have been designed for a 6/4mm hose. The
sample gas cooler is equipped with exactly one heat exchanger (PVDF, glass or SS316) and provides 1-2
gaspaths. The following feed lines must be connected:
Sample gas pipelines to the gas inlet connections
Analyzers to the gas outlet connections
Condensate pumps/tanks to the condensate outlet connections
Marking
Gas inlet
Marking
Gas outlet
Condensate outlet GP1
Gas inlet GP1 (red)
Gas outlet GP1 (blue)
Condensate outlet GP2
Gas inlet GP2 (red)
Gas outlet GP2 (blue)
The feed lines of the numerous possible heat-exchanger types (material PVDF/glass/SS316,
construction mono/dual, condensate connection top/bottom- see chapter “Technical Data”) may
have different designs. The picture above shows a SS316 dual-HE with condensate connections
on the top.
